In addition to the full mortise locks offered in passage and privacy applications (9125, 9025, 8525, 8625, 8725, 8825, 9139, 9039, 8539, 8639, 8839, 8739), Accurate offers two lines of interior mortise locks featuring smaller cases:

• 9500 (2 1/4" vertical spacing)
• 9800 (2 7/8" vertical spacing allowing the use of larger trim designs)

9500 Cut Sheets  | 9800 Cut Sheets | Templates | Trim options

• Premium quality locks for use on interior doors; available in 2 1/2" and 2 3/4" backsets

• For use with levers, or knobs

• Custom fitted for use with most manufacturers' sectional (rose) trim

• Can be used with Accurate's 6500-9500 trim

• Available with traditional style rabbeted fronts and strikes

• To order, please specify:

  • Function (e.g. 9525, 9539, 9524, 9825, 9839, 9824)

  • Backset (2 1/2" or 2 3/4")

  • Trim being used:

    • Lever x Lever

    • Knob x Knob

  • Door handing (RH, LH, RHR, LHR)

  • Sectional (rose) trim manufacturer.  If using escutcheon trim, please verify vertical spacing or call 203.348.8865 for assistance.

  • Finish required (please refer to chart below)

  • Door thickness - Lockbodies are supplied with strikes for 1 3/4" thick doors; extended strikes can be supplied by specifying the door thickness when ordering

TECH SPECS

• CASE: Heavy Gauge, Plated Steel

• ARMOR FRONT: From wrought brass, bronze or stainless steel material.  Adjustable bevel

• LATCH BOLT: Brass or Stainless Steel-Solid type, 7/16” throw

• DEADBOLT: Brass or Stainless Steel, 1/2” throw

• STRIKE: 1 1/4" lip to center standard, various sizes available upon request

• HUBS: Available in different sizes to be compatible with various trims

• THUMB TURN HUB: 3/16” (5mm) on the diamond

• DUST BOX: Brass, stainless steel or US10B

FINISHES

The face plate and strike come in most standard architectural finishes. If the required finish is not listed below, please call 203.348.8865 for assistance.  To view pictures of the most commonly supplied finishes, please click here.

		BHMA No.
Primed for painting	USP	600
Polished brass (highly polished brass and lacquered)	US3	605
Polished brass, no lacquer (highly polished brass, not lacquered)	US3NL
Satin brass (satin and lacquered)	US4	606
Satin brass and black (oxidized, relieved and lacquered)	US5	609
Satin brass and brown (oxidized, relieved and lacquered)	US6	608
Polished brass and black (oxidized, relieved and lacquered)	US7	610
Polished bronze (highly polished bronze and lacquered)	US9	611
Polished bronze, no lacquer (highly polished bronze, not lacquered)	US9NL
Satin bronze (satin and lacquered)	US10	612
Oil rubbed bronze (dull, slightly oxidized, oil rubbed)	US10B	613
Bright nickel plated (polished brass, nickel plated) / polished nickel	US14	618
Satin nickel plated (satin brass, nickel plated/brushed nickel)	US15	619
Antique nickel, dull (nickel plated brass, oxidized and relieved)	US15A	620
Satin black (black lacquer over sanded brass)	US19	622
Polished chromium (highly polished, plated on brass)	US26	625
Satin chromium (satin, plated on brass)	US26D	626
Bright stainless steel (highly polished)	US32	629
Satin stainless steel	US32D	630

TEMPLATES

9525/9539 L x L or K x K (all backsets)
9524 L x L or K x K (all backsets)

9825 L x L or K x K (2 1/2" backset)
9825 L x L or K x K (2 3/4" backset)
9839 L x L or K x K (2 1/2" backset)
9839 L x L or K x K (2 3/4" backset)