Accurate Lock and Hardware Co.-UL Listed Full Mortise Locks

1 Annie Place * Stamford, CT 06902
203.348.8865 * F: 203.348.5234

Premium quality locks available in a wide array of backsets including 2 1/2", 2 3/4", 3 3/4", 5", and 6" (Custom backsets also available)
For use with levers, knobs, thumb grip, and the most advanced ANTI-LIGATURE / ADA trim: the CRESCENT Handle
UL Listed 3 Hour (R13846)
- Single point locks and latches: GYJT.R13846
- Single point locks and latches Certified for Canada: GYJT7.R13846
Grade 1 certified to ANSI/BHMA A156.13.2005 standard - exceeding 5 million cycles at independent third party test facility
Anti-friction latch and security deadbolt with hardened steel inserts
Custom fitted for use with most manufacturers' sectional (rose) trim
The lock of choice among OEM manufacturers
Available with rabbeted fronts and strikes
Available for upside down-European style installation (handle above the cylinder / thumb turn: specify FUNCTION + USD e.g. 9159USD)
Electrification available in fail safe or fail secure functions
MARINE GRADE offered (limited functions)
To order, please specify:
- Function (e.g. 9159, 9145, 9148, 9139USD, 9124M, 9159ELEC)
- Backset (2 1/2", 2 3/4", 3 3/4", 5" or 6")
- Trim being used:
  - Lever x Lever
  - Knob x Knob
  - Thumb grip x Lever
  - Thumb grip x Knob
  - Thumb grip x Thumb grip
  - Knob outside, lever inside
  - Lever outside, knob inside
- Door handing (RH, LH, RHR, LHR)
- Sectional (rose) trim manufacturer (e.g. Schlage, Yale, etc.). If using escutcheon trim, please call 203.348.8865 for assistance
- Finish required (please refer to chart below)
- Door thickness - Lockbodies are supplied with 4 7/8" strikes for 1 3/4" thick doors; extended strikes can be supplied by specifying the door thickness when ordering
- For electric locks, please specify: 12V or 24V, fail safe (EL) or fail secure (EU) and/or special monitor functions

TECH SPECS

CASE: Heavy Gauge, Plated Steel
ARMOR FRONT: From wrought brass, bronze or stainless steel material. Adjustable bevel
LATCH BOLT: Brass-Anti friction type, 3/4” throw
DEADBOLT: Brass-with hardened steel inserts, 1” throw
STRIKE: 4 7/8” ASA (1 1/4" lip to center standard, various sizes available upon request)
HUBS: Available in different sizes to be compatible with various trims
THUMB TURN HUB: 3/16” (5mm) on the diamond
DUST BOX: Brass, stainless steel or US10B

FINISHES

The face plate and strike come in most standard architectural finishes. If the required finish is not listed below, please call 203.348.8865 for assistance. To view pictures of the most commonly supplied finishes, please click here.

		BHMA No.
Primed for painting	USP	600
Polished brass (highly polished brass and lacquered)	US3	605
Polished brass, no lacquer (highly polished brass, not lacquered)	US3NL
Satin brass (satin and lacquered)	US4	606
Satin brass and black (oxidized, relieved and lacquered)	US5	609
Satin brass and brown (oxidized, relieved and lacquered)	US6	608
Polished brass and black (oxidized, relieved and lacquered)	US7	610
Polished bronze (highly polished bronze and lacquered)	US9	611
Polished bronze, no lacquer (highly polished bronze, not lacquered)	US9NL
Satin bronze (satin and lacquered)	US10	612
Oil rubbed bronze (dull, slightly oxidized, oil rubbed)	US10B	613
Bright nickel plated (polished brass, nickel plated) / polished nickel	US14	618
Satin nickel plated (satin brass, nickel plated/brushed nickel)	US15	619
Antique nickel, dull (nickel plated brass, oxidized and relieved)	US15A	620
Satin black (black lacquer over sanded brass)	US19	622
Polished chromium (highly polished, plated on brass)	US26	625
Satin chromium (satin, plated on brass)	US26D	626
Bright stainless steel (highly polished)	US32	629
Satin stainless steel	US32D	630

TEMPLATES

For doors 1 3/8" minimum

9000 L x L or K x K (all backsets)
9000 TP x L / TP x K (all backsets)
9000 TP x TP (all backsets)

9000 UPSIDE DOWN L x L or K x K (all backsets)

For doors 1 3/4" minimum

9100 L x L or K x K (all backsets)
9100 TP x L / TP x K (all backsets)
9100 TP x TP (all backsets)

9100 UPSIDE DOWN L x L or K x K (all backsets)

ASA strike template

ASA strike template (deadlocks)

Lock functions (cylinders and trim shown for illustration purposes only)
	9100ADL for doors 1 3/4” minimum (1 1/4” armor front) 9000ADL for doors 1 3/8” minimum (1” armor front) Active Dummy Lock Active handles inside and outside
	9101 for doors 1 3/4” minimum (1 1/4” armor front) 9001 for doors 1 3/8” minimum (1” armor front) Deadlock (ANSI SERIES 1000-F18) Dead bolt by key outside No inside operation
	9102 for doors 1 3/4” minimum (1 1/4” armor front) 9002 for doors 1 3/8” minimum (1” armor front) Deadlock (ANSI SERIES 1000-F16) Dead bolt by key either side
	9103 for doors 1 3/4” minimum (1 1/4” armor front) 9003 for doors 1 3/8” minimum (1” armor front) Deadlock (ANSI SERIES 1000-F17) Dead bolt by key outside and turn piece inside
	9122 for doors 1 3/4” minimum ( 1 1/4” armor front) 9022 for doors 1 3/8” minimum (1” armor front) Store Door Lock (ANSI SERIES 1000-F14) Latch bolt by lever either side Dead bolt by key either side
	9124 for doors 1 3/4” minimum (1 1/4” armor front) 9024 for doors 1 3/8” minimum (1” armor front) Dormitory, Entrance or Storeroom Lock (ANSI SERIES 1000-F21) Latch bolt by lever either side Dead bolt by key outside and turn piece inside A turn of inside lever retracts latch and dead bolt simultaneously, automatically unlocking outside lever
	9125 for doors 1 3/4” minimum (1 1/4” armor front) 9025 for doors 1 3/8” minimum (1” armor front) Passage and Closet Latch (ANSI SERIES 1000-F01) Latch bolt by lever either side
	9134 for doors 1 3/4” minimum (1 1/4” armor front) 9034 for doors 1 3/8” minimum (1” armor front) Hotel or Motel Lock (ANSI SERIES 1000-F15) Latch bolt by lever inside and Guest or Master Key Outside Outside lever always RIGID Dead bolt by turn piece inside A turn of inside lever retracts latch and dead bolt simultaneously Auxiliary latch deadlocks latch bolt
	9139 for doors 1 3/4” minimum (1 1/4” armor front) 9039 for doors 1 3/8” minimum (1” armor front) Privacy bedroom or bathroom Lock (ANSI SERIES 1000-F19) Latch bolt by lever either side Dead bolt by turn piece inside and optional emergency key outside A turn of inside lever retracts latch and dead bolt simultaneously—automatically unlocking outside lever
	9142 for doors 1 3/4” minimum (1 1/4” armor front) 9042 for doors 1 3/8” minimum (1” armor front) Entrance or public restroom Lock (ANSI SERIES 1000-F09) Latch bolt by lever either side unless outside lever is locked by Master Key from inside When outside lever is locked, latch bolt by key outside and lever inside Auxiliary latch deadlocks latch bolt
	9145 for doors 1 3/4” minimum (1 1/4” armor front) 9045 for doors 1 3/8” minimum (1” armor front) Classroom Lock (ANSI SERIES 1000-F05) Latch bolt by key outside and lever either side unless outside lever is locked by key Auxiliary latch deadlocks latch bolt
	9148 for doors 1 3/4” minimum (1 1/4” armor front) 9048 for doors 1 3/8” minimum (1” armor front) Entrance or Apartment Lock (ANSI SERIES 1000-F12) Latch bolt by key outside and lever either side unless outside lever is locked by toggle action stop Dead bolt by key outside and turn piece inside Turning inside lever retracts latch and dead bolt simultaneously Outside lever remains locked until manually unlocked by toggle
	9149for doors 1 3/4” minimum (1 1/4” armor front) 9049for doors 1 3/8” minimum (1” armor front) Entrance or Apartment Lock (ANSI SERIES 1000-F12) Latch bolt by key outside and lever either side unless outside lever is locked by toggle action stop Dead bolt by key outside and turn piece inside Turning inside lever retracts latch and dead bolt simultaneously. Outside lever remains unlocked until manually locked by toggle or projection of deadbolt ** Function not offered on thumb grip x thumb grip applications
	9153 for doors 1 3/4” minimum (1 1/4” armor front) 9053 for doors 1 3/8” minimum (1” armor front) Entrance or Office Lock (ANSI SERIES 1000-F04) Latch bolt by key outside and lever either side unless outside lever is locked by thumb turn or key Key or thumb turn locks or unlocks outside lever Auxiliary latch deadlocks latch bolt
	9156 for doors 1 3/4” minimum (1 1/4” armor front) 9056 for doors 1 3/8” minimum (1” armor front) Entrance or Office Lock (ANSI SERIES 1000-F04) Latch bolt by key outside and lever either side unless outside lever is locked by toggle-action stop Auxiliary latch deadlocks latch bolt
	9159 for doors 1 3/4” minimum (1 1/4” armor front) 9059 for doors 1 3/8” minimum (1” armor front) Storeroom or Closet Lock (ANSI SERIES 1000-F07) Latch by lever inside and key outside Outside lever always RIGID Auxiliary latch deadlocks latch bolt
	9167 for doors 1 3/4” minimum (1 1/4” armor front) 9067 for doors 1 3/8” minimum (1” armor front) Entrance or Apartment Lock (ANSI SERIES 1000-F20) Latch bolt by key outside and lever either side, unless outside lever is locked by toggle-action stop Dead bolt by key outside and turn piece inside Turning inside lever retracts latch and dead bolt simultaneously Outside lever remains locked until manually unlocked by toggle Auxiliary latch dead locks latch bolt and prevents manipulation of locked toggle-action stop
	9169for doors 1 3/4” minimum (1 1/4” armor front) 9069**for doors 1 3/8” minimum (1” armor front) Entrance or Apartment Lock (ANSI SERIES 1000-F20) Latch bolt by key outside and lever either side, unless outside lever is locked by toggle-action stop Dead bolt by key outside and turn piece inside Turning inside lever retracts latch and dead bolt simultaneously. Outside lever remains unlocked until manually locked by toggle or projection of deadbolt Auxiliary latch dead locks latch bolt and prevents manipulation of locked toggle-action stop Function not offered on thumb grip x thumb grip applications

MORE FUNCTIONS