Cut Sheets | Finishes | Templates | Cylinder Cam info | Order Form
-
Narrow backsets including 1 1/4", 1 1/2", 1 3/4", 2", and 2 1/4" - ideal for narrow stile doors
-
For use with levers (most of the 8500/8600 functions can be set up for use with knobs, please call 203.348.8865 for assistance)
-
Custom fitted for use with most manufacturers' sectional (rose) trim
-
Available with rabbeted fronts and strikes
-
Most of the 8500/8600 functions are available for upside down-European style installation (handle above the cylinder / thumb turn: specify FUNCTION + USD e.g. 8524USD) - please call 203.348.8865 for assistance
-
To order, please specify:
-
Function (e.g. 8559, 8648, 8539USD)
-
Backset (1 1/4", 1 1/2", 1 3/4", 2", and 2 1/4")
-
Trim being used:
-
Lever x Lever
-
Knob x Knob (knob rotation both ways requires special lock setup and is not available in all functions - please call 203.348.8865 for assistance)
-
-
Door handing (RH, LH, RHR, LHR)
-
Sectional (rose) trim manufacturer (e.g. Schlage, Yale, etc.). If using escutcheon trim, please call 203.348.8865 for assistance
-
Finish required (please refer to chart below)
-
Door thickness - Lockbodies are supplied with 4 7/8" strikes for 1 3/4" thick doors; extended strikes can be supplied by specifying the door thickness when ordering
-
TECH SPECS
-
CASE: Heavy Gauge, Plated Steel
-
ARMOR FRONT: From wrought brass, bronze or stainless steel material. Adjustable bevel
-
LATCH BOLT: Brass-Solid type, 1/2" x 1" - 1/2” throw
-
DEADBOLT: Brass-1/2" x 3/4" - 1" throw
-
STRIKE: 4 7/8” ASA (1 1/4" lip to center standard, various sizes available upon request)
-
HUBS: Available in different sizes to be compatible with various trims
-
THUMB TURN HUB: 3/16” (5mm) on the diamond
-
DUST BOX: Brass, stainless steel or US10B
The face plate and strike come in most standard architectural finishes. If the required finish is not listed below, please call 203.348.8865 for assistance. To view pictures of the most commonly supplied finishes, please click here.
| BHMA No. | ||
| Primed for painting | USP | 600 |
| Polished brass (highly polished brass and lacquered) | US3 | 605 |
| Polished brass, no lacquer (highly polished brass, not lacquered) | US3NL | |
| Satin brass (satin and lacquered) | US4 | 606 |
| Satin brass and black (oxidized, relieved and lacquered) | US5 | 609 |
| Satin brass and brown (oxidized, relieved and lacquered) | US6 | 608 |
| Polished brass and black (oxidized, relieved and lacquered) | US7 | 610 |
| Polished bronze (highly polished bronze and lacquered) | US9 | 611 |
| Polished bronze, no lacquer (highly polished bronze, not lacquered) | US9NL | |
| Satin bronze (satin and lacquered) | US10 | 612 |
| Oil rubbed bronze (dull, slightly oxidized, oil rubbed) | US10B | 613 |
| Bright nickel plated (polished brass, nickel plated) / polished nickel | US14 | 618 |
| Satin nickel plated (satin brass, nickel plated/brushed nickel) | US15 | 619 |
| Antique nickel, dull (nickel plated brass, oxidized and relieved) | US15A | 620 |
| Satin black (black lacquer over sanded brass) | US19 | 622 |
| Polished chromium (highly polished, plated on brass) | US26 | 625 |
| Satin chromium (satin, plated on brass) | US26D | 626 |
| Bright stainless steel (highly polished) | US32 | 629 |
| Satin stainless steel | US32D | 630 |
For doors 1 3/8" minimum
For doors 1 3/4" minimum
